SUPERIOR ELECTRIC Industrial Partner

Superior Electric SS2000MD4 - MO Stepper Drive Control | 24-40VDC 40A DC Simple Type: Stepper Drive Control

The SS2000MD4M-O is designed for 24 to 40 Vdc input only Reconfiguration of the circuit in any fashion not shown in this manual will void the Warranty. Failure to follow the installation guidelines as described in Section 3 will void the Warranty. Drive/Oscillator is installed and operated before you attempt to use it. We strongly recommend that you read this manual completely before pro-ceeding with the installation of this unit. This manual is an installation and operating guide to the SLO-SYN SS2000MD4M-O Drive/Oscillator. Section 1 gives an overview of its fea-tures. Section 2 describes the steps necessary to place the MD4M-O into operation. General wiring guidelines as well as the physical mounting of the unit and connections to the drive portion are covered in Section 3. Complete specifications, listed in Section 4, provide easily referenced information concerning electrical, mechanical and environmental specifications. The procedure for setting the motor current level and connection of Oscillator I/O are also cov ered in this section. Torque versus speed characteristics with all appropriate SLO-SYN Stepper Motors are given in Section 5. Section 6, Troubleshooting, gives procedures to follow if the Drive/Oscillator fails to operate properly